Unfortunately, the ACCPAC Plus data dictionaries are copied into the ASP\DATADICT folder during the installation process - there is no 'shortcut'. I don't know if you can copy them from the install diskettes or not.

It could be that the IC data dictionaries themselves are not the ones that are corrupt, but others that QL attempts to initialize before getting to the IC data dicts.

To see if this is true, you could try this 'shortcut' to see if you are more successful:
1. Create a new folder
2. Copy all the data dicts from the ASP\DATADICT folder into the new folder
3. Remove all but the IC data dicts from the original ASP\DATADICT folder
4. Open QL and try to initialize your data now

If this works, then the problem was with another module's data dictionaries, not IC's.

To find out which ones are problematic, you can gradually add (copy) the original data dicts from the new folder into the ASP\DATADICT folder, initialize in QL and repeat until you find the culprit, then just remove the faulty ones and re-install that module only.

NOTE: QL is not compatible with GL 7.0. This version of GL does not come with data dictionaries and you will not be able to use QL for your GL if you are using GL V7.0.

Hope this helps!

Take care,